xCubes
  1. Home
  2. 9×9

9×9 cube solver

Paint every sticker to match your cube or fill it from photos, then press Solve.

Step 1. Orient the cube

  • White center — on top
  • Green center — facing you (front)
  • Red center — on the right

The center is the middle cell of a side (highlighted on the model). On a 9×9 the centers are fixed, so go by them, not by the color of the whole side.

Step 2. Enter colors for all 6 faces

Pick a color from the palette, then click cells. Clicking the center of a face fills the entire face with the selected color (handy when a face is almost done). Right-click (or long-press on a phone) — erase a cell.

← → switch faces

About the 9×9 cube

The 9×9 returns to odd layers, so the fixed centres and the absence of parity make it conceptually simpler than the 8×8 even though it has more pieces. Each face holds a 7×7 grid of centre pieces, which is where nearly all the work lives.

How it is solved by hand

Reduction, unchanged in principle from the 5×5 — only the centre and edge phases get longer. Wide-turn notation with explicit depth (3Rw, 4Rw) becomes essential to describe what you are turning.

What the cube is made of

  • 8corner pieces
  • 84edge pieces · 7 per edge
  • 294centre pieces · 7×7 per face
  • 486stickers in total

Positions you can reach by scrambling the 9×9: 1.41 × 10277 — a number with 278 digits.

From 9×9 up, reading a solution matters as much as executing it. The move list here uses standard depth-prefixed wide notation throughout.

A useful habit on the 9×9 is to finish each centre in the same order every time, for example bars first and then the cross pattern around the fixed middle. With a fixed routine, a mistake shows up as soon as a pattern looks unfamiliar instead of three faces later. The same applies to edges: pair the inner wings with the midge first, then work outward.

Entering the 9×9 into the solver

Orient the 9×9 by its fixed middles: white up, green facing you. Each face has 81 stickers, 486 in total. The 7×7 centre block is the hardest part to enter accurately, so take each face in good light or use the photo scan and review the result. The state check counts every colour and verifies each piece before the solver starts.

Common mistakes

  • Losing track of rows in the centre block. Use the outer edge as an anchor and count inward.
  • Reading wide moves as single-layer ones. A move like 3Rw turns three layers together, not only the third.
  • Stopping mid-solution without noting the step. At this size you will not remember where you left off.

Questions about the 9×9

Is the 9×9 harder than the 8×8?
It has more pieces but fixed centres and no parity, so many cubers find it more predictable. The extra effort is in the length of the centre and edge phases.
What does the number before a move mean?
It tells you how many layers to turn. 3Rw means the three outer right layers together; 3R alone means only the third layer from the right. The notation guide covers this.
How long does a 9×9 take by hand?
Experienced solvers need around half an hour or more; a first solve can take several hours.