xCubes
  1. Home
  2. 14×14

14×14 cube solver

Paint every sticker to match your cube or fill it from photos, then press Solve.

Step 1. Orient the cube

  • 1Any face toward you (that is face 1)
  • 5Remember which face is on top (face 5)
  • ↻Then turn the cube as the model shows

A 14×14 has no center cell, so face colors do not matter — only turning the cube correctly between faces does. Hold it the same way when solving.

Step 2. Enter colors for all 6 faces

Pick a color from the palette, then click cells. Right-click (or long-press on a phone) — erase a cell. Use the «Fill solved» button to start from the solved state.

← → switch faces

About the 14×14 cube

The 14×14 is an even-layered giant with no fixed centres, parity at the end, and a centre phase longer than most people's entire cubing history. Only a handful of manufacturers make one.

How it is solved by hand

Reduction, carried out in long passes. Twelve pieces per edge strip and a 144-piece centre grid per face.

What the cube is made of

  • 8corner pieces
  • 144edge pieces · 12 per edge
  • 864centre pieces · 12×12 per face
  • 1176stickers in total

Positions you can reach by scrambling the 14×14: 5.40 × 10707 — a number with 708 digits.

Alignment is the real enemy. A slice that is a few degrees off will jam the next turn, so check that every layer is flush before turning.

Very large cubes are as much about handling as about solving. Turn the outer layers with your whole hand rather than your fingertips, keep the cube supported from below, and stop to realign the whole puzzle every few dozen moves. A clean, aligned cube makes long move lists from the solver much easier to follow accurately.

Entering the 14×14 into the solver

Choose face 1 and the top face yourself, then keep that grip and follow the model between faces. The 14×14 has 196 stickers per face and 1,176 in total, so use photo input and review the 12×12 centre block of each face before solving.

Common mistakes

  • Forcing a stuck turn. Realign every layer first; on cubes this size, forcing usually means a popped piece.
  • Scanning under a single strong lamp. Glare washes out white and yellow.
  • Turning the cube between faces in the wrong direction. Without centres, this cannot be caught automatically.

Questions about the 14×14

Does the 14×14 have parity?
Yes. Like every even cube it can need a parity fix near the end, which the solver includes.
How many edge pieces are there?
144 — twelve on each of the twelve edge strips.
What's the best way to work through the solution?
Treat each phase as its own session. Check the cube against the phase description before starting the next one.