- Home
- 15×15
15×15 cube solver
Paint every sticker to match your cube or fill it from photos, then press Solve.
Step 1. Orient the cube
- White center — on top
- Green center — facing you (front)
- Red center — on the right
The center is the middle cell of a side (highlighted on the model). On a 15×15 the centers are fixed, so go by them, not by the color of the whole side.
Step 2. Enter colors for all 6 faces
Pick a color from the palette, then click cells. Clicking the center of a face fills the entire face with the selected color (handy when a face is almost done). Right-click (or long-press on a phone) — erase a cell.
← → switch faces
About the 15×15 cube
The 15×15 is the largest size this solver supports and one of the largest cubes ever produced commercially. It is odd-layered, so the centres are anchored and there is no parity — but with over a thousand centre pieces, a manual solve is measured in hours.
How it is solved by hand
Reduction. The same three phases as a 5×5, stretched to their limit: thirteen centre rings per face and thirteen pieces per edge strip.
What the cube is made of
- 8corner pieces
- 156edge pieces · 13 per edge
- 1014centre pieces · 13×13 per face
- 1350stickers in total
Positions you can reach by scrambling the 15×15: 7.45 × 10813 — a number with 814 digits.
At this size the value of a solver is not skipping the challenge — it is having a verified target to check your own work against when a phase goes wrong.
With more than a thousand stickers, the 15×15 is the size where entry accuracy matters most. A good routine is: scan a face, compare its first and last rows with the real cube, fix any flagged cells, then move on. Five minutes of checking is far cheaper than discovering an impossible state after the whole cube has been entered.
Entering the 15×15 into the solver
The 15×15 keeps a fixed middle on every face, so orient it like a 3×3: white up, green toward you. Each face has 225 stickers — 1,350 in total — and painting them by hand is a long job, so photo input is the practical route. Review the 13×13 centre block after every scan; the state check confirms colour counts and pieces before solving.
Common mistakes
- Photographing at an angle. At 15×15 a small tilt is enough to shift a whole row of stickers.
- Skipping the review of flagged cells. Even one wrong sticker makes the state impossible.
- Trying to execute the whole solution in one sitting. Split it by phases.
Questions about the 15×15
- Does the 15×15 have parity?
- No. It is odd-layered, so the centres are anchored and parity cannot occur.
- How many centre pieces does it have?
- 1,014 — a 13×13 block on each of the six faces, the fixed middle included.
- Why stop at 15×15?
- Beyond this size, entering every sticker becomes impractical for most people and the solutions run to thousands of moves. 15×15 covers almost every cube people actually own.