xCubes
  1. Home
  2. 12×12

12×12 cube solver

Paint every sticker to match your cube or fill it from photos, then press Solve.

Step 1. Orient the cube

  • 1Any face toward you (that is face 1)
  • 5Remember which face is on top (face 5)
  • ↻Then turn the cube as the model shows

A 12×12 has no center cell, so face colors do not matter — only turning the cube correctly between faces does. Hold it the same way when solving.

Step 2. Enter colors for all 6 faces

Pick a color from the palette, then click cells. Right-click (or long-press on a phone) — erase a cell. Use the «Fill solved» button to start from the solved state.

← → switch faces

About the 12×12 cube

The 12×12 is even-layered and, for most owners, a display piece. Nothing on it is anchored: the colour scheme exists only in your head until the centres are finished, and parity waits at the end.

How it is solved by hand

Reduction, with a centre phase that dominates everything else and edge pairing across ten pieces per strip.

What the cube is made of

  • 8corner pieces
  • 120edge pieces · 10 per edge
  • 600centre pieces · 10×10 per face
  • 864stickers in total

Positions you can reach by scrambling the 12×12: 2.06 × 10513 — a number with 514 digits.

Mass-produced cubes at this size have real mechanical limits. Turn slowly, keep the layers aligned, and support the cube from underneath rather than squeezing it.

Because the 12×12 has no fixed centres, the colour scheme is decided by your first two centres. Check them against a corner piece that contains both colours: if the corner's colours appear clockwise in the wrong order, one centre is on the wrong face. Catching that early saves rebuilding a 100-piece centre later.

Entering the 12×12 into the solver

Pick face 1 freely, remember the top face, and turn the 12×12 only as the page shows. There are 144 stickers per face and 864 in total. Scan each face square-on in even light, then compare the 10×10 centre block with the cube before solving.

Common mistakes

  • Leaving layers slightly misaligned. Large cubes jam easily and can pop pieces when forced.
  • Turning the cube between faces in a different direction. Even cubes depend on the grip you chose.
  • Losing your place in the move list. Mark the last finished step before every break.

Questions about the 12×12

Is a 12×12 worth solving by hand?
For many owners it is a long-term project: a first solve can stretch across several sessions. Using a solver for one phase is a common way to learn the others.
Does the 12×12 have parity?
Yes, it is even-layered. Expect edge parity or swapped pieces near the end; the solver includes the fix.
How many centre pieces does it have?
600 — a 10×10 block on each of the six faces.