xCubes
  1. Home
  2. 4×4

4×4 cube solver

Paint every sticker to match your cube or fill it from photos, then press Solve.

Step 1. Orient the cube

  • 1Any face toward you (that is face 1)
  • 5Remember which face is on top (face 5)
  • ↻Then turn the cube as the model shows

A 4×4 has no center cell, so face colors do not matter — only turning the cube correctly between faces does. Hold it the same way when solving.

Step 2. Enter colors for all 6 faces

Pick a color from the palette, then click cells. Right-click (or long-press on a phone) — erase a cell. Use the «Fill solved» button to start from the solved state.

← → switch faces

About the 4×4 cube

The 4×4, or Rubik's Revenge, is the first cube with no fixed centres. Each face carries a 2×2 block of loose centre pieces and each edge is split into two wings, so the colour scheme has to be rebuilt from scratch before any 3×3 knowledge applies. It is the size where most people first meet the reduction method.

How it is solved by hand

Reduction: build the six centres, pair the 24 wings into 12 complete edges, then solve the result as a 3×3. The catch is parity — because the wings can be swapped in ways a real 3×3 never allows, you may end up with a single flipped edge or two swapped corners and need a dedicated parity algorithm.

What the cube is made of

  • 8corner pieces
  • 24edge pieces · 2 per edge
  • 24centre pieces · 2×2 per face
  • 96stickers in total

Positions you can reach by scrambling the 4×4: 7.40 × 1045 — a number with 46 digits.

Parity is not a manufacturing defect and not a mistake on your part; it is a mathematical property of even-layered cubes. Every 4×4 solver, including this one, has to handle it.

Entering the 4×4 into the solver

With no fixed centres, the 4×4 needs one decision before you start: choose a face as face 1, remember which face is on top, and keep the cube in that grip until you finish entering. The solver then works out the colour scheme from the corners, which are the only pieces whose colours are fixed relative to each other. Each of the 96 stickers matters, including the four centre stickers on every face.

Common mistakes

  • Treating the four centre stickers of a face as one colour block. On a scrambled 4×4 they are usually mixed — paint each one individually.
  • Changing grip halfway through entry. The faces must be read in the order the page shows, without spinning the cube in between.
  • Expecting the solution to avoid parity. If your cube needs a parity fix, the solver includes it in the move list.

Questions about the 4×4

What are OLL parity and PLL parity?
They are the two situations that appear when you finish a 4×4 as if it were a 3×3: a single edge looks flipped (OLL parity), or two edges or two corners look swapped (PLL parity). Both come from the way wings pair up and are fixed with special algorithms.
Who invented the 4×4?
The Rubik's Revenge was designed by Péter Sebestény and released in the early 1980s, soon after the original 3×3 became a worldwide hit.
Why can my 4×4 be solved in different colour orientations?
Because there is no fixed centre, the puzzle only has a colour scheme defined by its corners. The solver reads those and places the centres to match.