- Home
- 8×8
8×8 cube solver
Paint every sticker to match your cube or fill it from photos, then press Solve.
Step 1. Orient the cube
- 1Any face toward you (that is face 1)
- 5Remember which face is on top (face 5)
- ↻Then turn the cube as the model shows
A 8×8 has no center cell, so face colors do not matter — only turning the cube correctly between faces does. Hold it the same way when solving.
Step 2. Enter colors for all 6 faces
Pick a color from the palette, then click cells. Right-click (or long-press on a phone) — erase a cell. Use the «Fill solved» button to start from the solved state.
← → switch faces
About the 8×8 cube
At 8×8 the puzzle stops being a speedcubing object and becomes an endurance exercise. It is even-layered, so there are no fixed centres and parity is back, and the inner slices are thin enough that turning accurately takes a deliberate hand. Hardware quality matters more than technique here — a cheap 8×8 will pop or lock rather than turn.
How it is solved by hand
Reduction. Centre building is the dominant phase; edge pairing runs in three passes because each edge holds six pieces.
What the cube is made of
- 8corner pieces
- 72edge pieces · 6 per edge
- 216centre pieces · 6×6 per face
- 384stickers in total
Positions you can reach by scrambling the 8×8: 3.51 × 10217 — a number with 218 digits.
Manual solves commonly run 15–25 minutes. This is the size where most people start using a solver for the parts they have already proved they can do by hand.
Big even cubes reward a fixed routine. Many solvers build the first two centres on opposite faces, then the remaining four as a ring, always checking the colour scheme against a corner before committing. Lubricating a new 8×8 and letting it break in for a few solves makes a bigger difference than on smaller cubes: a stiff slice is what usually causes lockups and popped pieces.
Entering the 8×8 into the solver
The 8×8 is even-layered, so you choose the orientation: any face as face 1, the top face remembered, and the cube turned exactly as the model shows. With 384 stickers, entry takes a while; photo input is the practical route. Check the 6×6 centre block on each face for any cell the scanner marked as uncertain.
Common mistakes
- Turning the cube in the wrong direction between faces. On even cubes the page cannot correct for this, because there are no centres to check against.
- Entering a face mirrored. Look at the face directly, not through a reflection or a mirrored front camera.
- Misaligned layers during the solve. A half-turned slice blocks the next move and can twist pieces out of place.
Questions about the 8×8
- Is the 8×8 a competition event?
- No. Official World Cube Association events stop at 7×7. Larger cubes are solved at unofficial events and in online communities.
- Does the 8×8 have parity?
- Yes. Like every even cube it can end with a single flipped edge or two swapped pieces, and the solver includes the fix in its move list when needed.
- How many pieces does it have?
- 8 corners, 72 edge pieces and 216 centre pieces — 296 moving parts on the outside, plus the internal mechanism.