xCubes
  1. Home
  2. 13×13

13×13 cube solver

Paint every sticker to match your cube or fill it from photos, then press Solve.

Step 1. Orient the cube

  • White center — on top
  • Green center — facing you (front)
  • Red center — on the right

The center is the middle cell of a side (highlighted on the model). On a 13×13 the centers are fixed, so go by them, not by the color of the whole side.

Step 2. Enter colors for all 6 faces

Pick a color from the palette, then click cells. Clicking the center of a face fills the entire face with the selected color (handy when a face is almost done). Right-click (or long-press on a phone) — erase a cell.

← → switch faces

About the 13×13 cube

The 13×13 is odd-layered, parity-free, and near the practical ceiling for mass-produced twisty puzzles. Each face carries a 121-piece centre grid around a single fixed middle.

How it is solved by hand

Reduction. Conceptually identical to a 5×5; the difference is entirely in scale and in how long you can stay focused.

What the cube is made of

  • 8corner pieces
  • 132edge pieces · 11 per edge
  • 726centre pieces · 11×11 per face
  • 1014stickers in total

Positions you can reach by scrambling the 13×13: 8.76 × 10603 — a number with 604 digits.

Solutions at this size run into the high hundreds of moves. Work through them in sittings, and re-check the cube against the move list before continuing after a break.

Large odd cubes are often solved with the same pattern repeated across the face: build matching 1×N bars, then insert them next to the fixed middle. On a 13×13 that pattern has to be repeated many times per face, so efficiency comes from consistency rather than clever algorithms.

Entering the 13×13 into the solver

Orient the 13×13 by its fixed middles: white up, green facing you. With 169 stickers per face and 1,014 in total, photo input is close to essential. Check the flagged cells after each scan rather than repainting a face — the 11×11 centre block is where you will find most of them.

Common mistakes

  • Taking photos too far away. Each sticker must cover enough pixels to read its colour reliably.
  • Mixing up depth in wide moves. At this size a move can turn six layers at once.
  • Continuing after a break without checking the cube against the solution step.

Questions about the 13×13

Does the 13×13 have parity?
No. It is odd-layered, so the centres are anchored and the parity cases of even cubes never appear.
How many moves does a solution have?
Typically in the high hundreds or more. The list is split into phases so you can check your progress.
Is it the same method as a 5×5?
Yes — reduction: centres, edges, then the 3×3 stage. The pattern stays the same; only the scale changes.