- Home
- 6×6
6×6 cube solver
Paint every sticker to match your cube or fill it from photos, then press Solve.
Step 1. Orient the cube
- 1Any face toward you (that is face 1)
- 5Remember which face is on top (face 5)
- ↻Then turn the cube as the model shows
A 6×6 has no center cell, so face colors do not matter — only turning the cube correctly between faces does. Hold it the same way when solving.
Step 2. Enter colors for all 6 faces
Pick a color from the palette, then click cells. Right-click (or long-press on a phone) — erase a cell. Use the «Fill solved» button to start from the solved state.
← → switch faces
About the 6×6 cube
The 6×6 is the awkward middle child of the big cubes: large enough that centre building takes real planning, and even-layered, so parity comes back. There are no fixed centres at all, and each edge is made of four separate pieces that have to be stacked into a single strip.
How it is solved by hand
Reduction with an extra layer of bookkeeping. Build the six 4×4 centre blocks, pair the 48 edge pieces (usually in two passes — inner wings first, then outer), then solve the 3×3 and apply parity fixes as needed.
What the cube is made of
- 8corner pieces
- 48edge pieces · 4 per edge
- 96centre pieces · 4×4 per face
- 216stickers in total
Positions you can reach by scrambling the 6×6: 1.57 × 10116 — a number with 117 digits.
Because nothing is anchored, a wrong colour scheme in the centres stays invisible until edge pairing. Check the opposite-face colours after your second centre, not at the end.
Entering the 6×6 into the solver
Like the 4×4, the 6×6 has no fixed centres: pick any face as face 1, remember the top face, and turn the cube only as the model shows. There are 216 stickers, and the 4×4 centre block on each face is where most entry errors hide. The solver needs every sticker right, so check each face against the real cube before moving to the next one.
Common mistakes
- Reading the 4×4 centre block in the wrong direction. Count rows from the edge nearest to you so the grid matches the page.
- Assuming opposite colours are already settled. On a scrambled 6×6 nothing is anchored — the corners alone define the scheme.
- Forgetting that parity can appear. A finished-looking 6×6 can still need a parity sequence near the end.
Questions about the 6×6
- Why is the 6×6 considered harder than the 7×7 by some cubers?
- Because the 7×7 has fixed centres and no parity, while the 6×6 has neither. The 7×7 is bigger, but the 6×6 has more ways to go wrong.
- Who designed the 6×6?
- The first mass-produced 6×6 was the V-Cube 6, designed by Panagiotis Verdes and released in 2008. His mechanism made large cubes practical to produce.
- How long is a typical solution?
- Several hundred moves. The solver splits the list into phases — centres, edge pairing, the 3×3 stage — so you can check the cube after each one.